Quad Cycles

Products

"Sizing Notes"

Breezer Town Bikes (Uptown, Villager, Citizen)

Each town bike comes in Diamond frame (3 sizes) or U-frame (2 sizes)
All frames are measured from BB to top of seat tube.
Suspension posts, all: 13.8" (350mm) x Ø27.2mm; minimum insertion: 4" (100mm).
Seat post adjustment range is 5.7" (145mm), measured BB to top of saddle.
Cranks are all 170mm.
Standover height is measured from midpoint of top tube.

Frame/size	Adjustment Range	Rider Height Range	Standover Height
Diamond Frame L - 55cm (21.6") M - 50cm (19.7") S - 43cm (17")	28.2" to 33.9" 26.3" to 32.0" 23.6" to 29.3"	fits riders 5'9" to 6'3" fits riders 5'6" to 6'0" fits riders 5'2" to 5'8"	31.5" 30.5 29.0"
U Frame M - 48cm (19") S - 43cm (17")	25.6" to 31.3" 23.6" to 29.3"	fits riders 5'5" to 5'11" fits riders 5'2" to 5'8"*

* If U frames are fitted with non-suspension seat posts, riders with legs 2.5" shorter can be fitted. So the small U-frame would fit riders down to about 4' 10".

Breezer Range Bikes (Liberty, Greenway)

All frames are measured from BB to top of seat tube.
All posts: 13.8" (350mm) x Ø27.2mm; min. insertion: 4" (100mm)
Supension post adjustment range is 5.7" (145mm), BB to top of saddle.
Cranks are all 170mm.
Standover height is measured from midpoint of top tube.

Frame/size	Adjustment Range	Rider Height Range	Standover Height
Direct-X Frame L - 56cm (22") M - 51cm (20") S - 43cm (17")	28.2" to 33.9" 26.8" to 32.5" 23.6" to 29.3"	fits riders 5'9" to 6'3" fits riders 5'6" to 6'0" fits riders 5'2" to 5'8"	27.5" 27" 27"

Breezer Compact Bikes (i7, i3, itzy)

Model	Rider Height Range	Rider Maximum Weight
i7 i3 itzy	Fits riders 4'8" to 6'3" Fits riders 5'1" to 6'1" (see notes below) Fits riders 4'2" to 5'9"	220 pounds 220 pounds 190 pounds

Notes on i7

Seat post: 21.6" (550mm) x Ø31.8mm; minimum insertion: 4" (100mm).
Range of seat post adjustment (measured from BB center to top of saddle) is 14" (355mm), from 17" (430mm) to 31" (790mm).
CAUTION: Do not insert seat post too far. Seat post clamp must clamp the full diameter of the seat post.

Notes on i3

Seat post: 21.6" (550mm) x Ø31.2mm; minimum insertion: 4" (100mm).
Range of seat post adjustment: 5" (125mm). From 25" (625mm) to 30" (760mm), measured from BB center to top of saddle.
For a lower seat height, the i3 seat post can be cut as short as 12" (300mm) to accommodate people about 4'4" tall. For poeple under that height, stand-over clearance may be a problem.
CAUTION: Make sure there is a minimum 3/4" (20mm) of space between bottom of seat post and top of bottom bracket shell, to account for swingarm movement.

Notes on itzy

Seat post: 21" (530mm) x Ø28.6mm; minimum insertion: 4" (100mm).
Range of seat post adjustment: 8" (200mm). From 19" (480mm) to 27" (690mm) measured from BB center to top of saddle.
The itzy seat post can be cut shorter, but the limiting fit factor is more likely to be the rider's horizontal reach to the handlebar.
CAUTION: Minimum height limit from BB center to top of saddle is 22" (560mm). While riding, do not allow seat post to extend below chainring guard, to prevent snagging post on obstructions.